Easy & Simple Tricks To Keep Your Blue Light Glasses Scratch Free!

Blue light blocking glasses are indeed one of the best investments in the modern high-tech era. Increasing screen times and high usage of digital devices have led to increasing eye defects and problems. Undoubtedly, digital devices are an excellent way that help us feel connected with our near and dear ones, yet they come with bad news for your eyes. Excess emission of blue light can lead to numerous hazardous problems. 

One of the best and handy solutions to get rid of problems is buying blue-light-blocking glasses. If you already have a pair of glasses, you must keep the glass lens clean to clear your vision, and keeping it protected from scratches should be your utmost priority. Here are a few solutions that will help you easily remove the scratches and keep your glass safe and secure. 

  • Warm Water + Dish Wash 

If you pick the cloth that lies near you to clean out the dirt on your glasses, you're probably following the wrong technique. One of the safest and effective ways to clean out your eye protection glasses is using a mixture of warm water and dish wash. 

Note:- Pick the water with optimum temperature, and excessively hot or cold water can damage the frame lens permanently. Therefore, you must go for lukewarm water and will clean the lens without damaging it. 

Procedure:-Rinse the lens with lukewarm water and then apply dish wash on both lenses. Rub the lens in a circular motion using your fingertips, and ensure that you rub the soap all over the frame surface until the foam appears. For crevice cleaning, use a soft cotton cloth, and this will help you wipe off the entire dust without any damage. Once you're done with the procedure, wash out the entire lens with lukewarm water. 

Rinse it twice to make sure the soap is completely removed from the glasses. Watch out for the lens to make sure it is adequately free from dust. If you feel there are a few dust particles stuck in the crevices, remove them completely with the help of a toothpick. Your last step should be drying the entire blue light protection glasses with the help of a microfiber cloth. Yay! You've got a clear lens. 

Have scratches on your lens surface? Fret not; we've got everything covered for you! Check out the below-mentioned tips that will help you to get scratch-free blue-light-blocking glasses

  • Toothpaste Cleaner 

Got your blue light kids glasses scratched? Fret not! Your toothpaste cleaner is enough to give your glasses a scratch-free look. 

Aside from making your teeth pearly white, toothpaste is a great choice for removing the scratches from your blue light glasses. 

Note:- Don't pick a toothpaste that has a high RDA or abrasive rating. The reason is that toothpaste with a high RDA rating can make the scratches even worse. Therefore, you need to avoid toothpaste that contains microbeads or other similar practicals. 

Procedure:-Apply a pea-sized amount of toothpaste on a soft microfiber cotton cloth. Rub the cloth on the scratch for at least 10 seconds, and make sure you rub it in a circular motion to adequately remove the scratch from your lenses. 

Once the procedure is done, clean the whole lens with a soft and clean cotton cloth. If you feel the scratches are deeper, repeat the procedure 3-4 times to get the required results. Feel free to go with the procedure as it won't damage the lens or worsen the scratch. 

  • Metal Polish & Rubbing Alcohol 

A blend of metal polish and rubbing cloth for blue light protection glasses cleaning may sound weird to some readers. Although the blue light glass lens is non-metal, using a metal polish can help you remove the scratch from it. 

Note:- Similar to the method above, and you need to avoid the metal polish with a high RDA or abrasive rating. Plus, use a soft microfiber clean while you accomplish the process, and this will help you avoid lens damage. 

Procedure:- Mix the metal polish with rubbing alcohol and apply the mixture to both the lens and the scratch, of course. Make sure you use the microfiber cotton cloth to rub the mixture on the lens. 

Once the buffing procedure is adequately done, and the scratch is removed, it's good to wipe the whole surface with rubbing alcohol. This will help your blue light protection lens to achieve a smooth glossy finish. 

  • Baking Soda + Warm Water 

Baking soda is a multi-purpose ingredient found in every household, and you can use it to make your lens free from scratches as well as dirt. Mix baking soda in a small amount of water to make a thick surface. 

Note:- Avoid using excessively warm water as it can highly damage the lens. Opt for lukewarm water when you mix baking soda and make the paste. 

Procedure:- Make a thick paste of baking soda using lukewarm water. Then spread it on the entire blue light blocking glasses surface. Use a cotton ball or a microfiber lens to rub the paste all over the lens surface. Rub the paste in a circular motion for 10 seconds. 

Rinse the glass with lukewarm water and check whether or not the scratches are removed. Use a clean cloth to remove the left paste on the lens. For deeper scratches, follow the same procedure 3-4 times until your glass is scratch-free. 

One Last Thing! 

Keeping an eye on your pair of blue light protection glasses is important. Regular cleaning and maintenance will help you to ensure that they function properly. As soon as you get up in the morning, it's good to check whether or not your glass is free from dust particles. Additionally, make regular blue light glass cleaning a habit to rest assured that they will help you in the long run. Don't just throw them as soon as you've finished your glass chore, and this will help you avoid scratching or breaking the lens surface.